Onkyo TX-NR5100 - Setup Menu; 1. Input;Output Assign

90
Setup
Setup Menu
Menu list
1. Input/Output Assign 1. TV Out / OSD Make settings for TV output and On-Screen Displays (OSD) that appear on the TV. p92
2. HDMI Input You can change input assignment between the input selectors and HDMI IN jacks.
p94
3. Digital Audio Input Change input assignment between the input selectors and DIGITAL IN COAXIAL/OPTICAL jacks.
p95
4. Analog Audio Input Change input assignment between the input selectors and AUDIO IN jacks.
p95
2. Speaker 1. Conguration Change the settings of connection environment of the speakers.
p96
2. Crossover Change the settings of crossover frequencies.
p97
3. Distance Set the distance from each speaker to the listening position.
p98
4. Level Calibration Adjust the volume level of each speaker.
p98
5.
Dolby Enabled Speaker Change the settings of Dolby Enabled Speakers. p99
6. Equalizer Settings You can adjust the output volume of the range for each connected speaker.
p99
7. Speaker Virtualizer The Speaker Virtualizer function can be switched between On and O󰀨.
p100
3. Audio Adjust 1. Multiplex/Mono Change the settings of multiplex audio playback.
p101
2. Dolby Change the setting of when Dolby signals are input.
p101
3. DTS Change the setting of when DTS signals are input.
p102
4. LFE Level Set the low-frequency e󰀨ect (LFE) level for Dolby Digital series, DTS series, Multichannel PCM,
and DSD signals.
p102
5. Volume Change the Volume settings.
p102
Use the on-screen displays (OSD) that appear on the TV to make the settings.
Press
on the remote controller to display the Setup menu.
Select the item with the cursors / of the remote controller, and press the ENTER button to conrm your selection.
Use the cursors / to change the default values.
• To return to the previous screen, press .
• To exit the settings, press the button.
Setup
1. Input/Output Assign
2. Speaker
3. Audio Adjust
4. Source
5. Hardware
6. Multi Zone
7. Miscellaneous
1. TV Out / OSD
2. HDMI Input
3. Video Input
4. Digital Audio Input
5. Analog Audio Input
Setup
1. Input/Output Assign
2. Speaker
3. Audio Adjust
4. Source
5. Hardware
6. Miscellaneous
1. TV Out / OSD
2. HDMI Input
3. Digital Audio Input
4. Analog Audio Input