Onkyo TX-NR5100 - Connecting Playback Devices

48
Connections
Connecting Playback Devices
Connecting an AV Component with HDMI Jack
This is a connection example of an AV component equipped with an HDMI jack.
When connecting with an AV component that conforms to the CEC (Consumer
Electronics Control) standard, you can use the HDMI CEC function (*) that
enables linking with input selectors, etc. and the HDMI Standby Through
function that can transmit video and audio signals of the AV component to the
TV even if this unit is in standby mode.
• Settings are required when 4K or 8K high-quality video is to be played.
Refer to "HDMI 4K/8K Signal Format" ( →p93) for information on the
settings. Also, use an HDMI cable that supports 4K or 8K video.
• The corresponding resolution is di󰀨erent depending on the HDMI jack
connected. See "Supported input resolutions" ( →p154) for details.
• To enjoy digital surround sound including Dolby Digital, set the audio output of
the connected Blu-ray Disc player etc. to the Bitstream output.
(*)The HDMI CEC function: This function enables various linking operations with
CEC-compliant devices, such as switching input selectors interlocking with
a CEC-compliant player, switching audio output between TV and this unit or
adjusting the volume using the remote controller of a CEC-compliant TV, and
automatically switching this unit to standby when the TV is turned o󰀨.
a HDMI cable
GAME
BD/DVD Cable/Satellite
set-top box
a
Be sure to insert the HDMI
cable all the way in.