Onkyo TX-NR5010 - User Manual

E n
AV RECEIVER
TX-NR5010
TX-NR3010
Instruction Manual
Contents
Safety Information and Introduction ............2
Table of Contents...........................................6
Connections .................................................13
Turning On & Basic Operations..................26
Advanced Operations ..................................57
Controlling Other Components...................92
Appendix.....................................................101
Internet Radio Guide
Remote Control Codes

Onkyo TX-NR5010 Specifications

General

Output level	0.001 mV
Receiver type	Surround
Frequency range	5 - 100000 Hz
Output impedance	470 Ω
Input sensitivity	200 mV
Audio output channels	9.2 channels
Signal-to-Noise Ratio (SNR)	110 dB
Total Harmonic Distortion (THD)	0.05 %
Dynamic power per channel (3 Ohm)	400 W
Dynamic power per channel (4 Ohm)	300 W
Power output per channel (1KHz@6 Ohm)	220 W
Power output per channel (20-20KHz@8 Ohm)	180 W
HDMI in	9
PC in (D-Sub)	Yes
Audio (L/R) in	7
Composite video in	5
Digital audio coaxial in	3
Digital audio optical in	4
Component video (YPbPr/YCbCr) in	2
Component video (YPbPr/YCbCr) out	1
Speakers connectivity type	-
Audio formats supported	AAC, FLAC, LPCM, MP3, OGG, WAV, WMA
Ethernet LAN	No
AM band range	522 - 1710 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Preset stations quantity	40
Product color	Black
Audio decoders	Dolby Pro Logic IIz, Dolby TrueHD, DTS Neo:X, DTS-HD
Apple docking compatibility	Not supported
AC input voltage	220-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.15 W
Power consumption (typical)	1160 W
Package weight	29000 g
Cables included	AC

Weight and Dimensions

Depth	463.5 mm
Width	435 mm
Height	198.5 mm
Weight	25000 g