To Next PageTo Next Page
Need help?Do you have a question about the Onkyo TX-NR5007 and is the answer not in the manual?
General| Impedance | 4 Ω |
|---|---|
| Frequency range | 5 - 100000 Hz |
| Audio output channels | 9.2 channels |
| Signal-to-Noise Ratio (SNR) | 110 dB |
| Package depth | 594 mm |
| Package width | 576 mm |
| Package height | 337 mm |
| Dimensions (WxDxH) | 435 x 198 x 463 mm |
| Power requirements | AC 220-240 V, 50/60 Hz |
| HDMI ports quantity | 9 |
| Output power description | 220 W/Ch |
| AM band range | 522 - 1611 kHz |
| FM band range | 87.5 - 108 MHz |
| Radio Data System (RDS) | Yes |
| S-Video inputs quantity | 1 |
| Product color | Black |
| Package weight | 30800 g |
| Power consumption (typical) | 1160 W |
Weight and Dimensions| Weight | 25000 g |
|---|
Safety checks for U.S.A. models, including leakage current measurement.
Block diagram illustrating the audio signal flow and processing.
Block diagram showing the video signal flow and processing.
Block diagram illustrating DSP, Ethernet, USB, and Network sections.
Schematic diagram for the voltage amplifier section of AMP1.
Schematic diagram for the final stage amplifier section of AMP2.
Schematic diagram for AMP3, covering power supply, protect circuits, etc.
Schematic diagram for the analog audio section, part 1.
Schematic diagram for the analog audio section, part 2.
Schematic diagram for the analog audio section, part 3.
Schematic diagram for the analog video section.
Schematic diagram for the digital audio input section.
Schematic diagram for the main microprocessor section.
Schematic diagram for the digital power supply section.
Schematic diagram for the primary power supply section related to amplifiers.
Schematic diagram for the DSP memory section.
