J
Jennifer HubbardAug 4, 2025
How to troubleshoot other issues during Onkyo TX-NR5008 update?
- AAngela MartinezAug 4, 2025
Retry the update procedure from the beginning. If the error persists, please contact Onkyo Support and provide the error code.

How to troubleshoot other issues during Onkyo TX-NR5008 update?
Retry the update procedure from the beginning. If the error persists, please contact Onkyo Support and provide the error code.
What does it mean when “No Update” is displayed on the front display of my Onkyo TX-NR5008?
If “No Update” is displayed on the front display of your Onkyo Receiver, you do not need to do anything further.
Why does an error occur during the updating process on my Onkyo Receiver?
If an error occurs during the update process of your Onkyo Receiver, first, disconnect and then reconnect the AC power cord and try again. If the error persists, ensure that the Ethernet cable is properly connected, consulting the instruction manual for network connection details. Furthermore, verify your Internet connection by checking the IP address, subnet mask, gateway address, and DNS server configurations. Confirm that your router is turned on and that the receiver and router are connected with an Ethernet cable. Also, ensure the router's setup configuration is correct by referring to its instruction manual. If your network limits client connections, disconnect other devices. If using a modem without router functionality, you'll need a router. Depending on your network, proxy server ...
| Impedance | 16 Ω |
|---|---|
| Output level | 100 mV |
| Output impedance | 470 Ω |
| Input sensitivity | 200 mV |
| Audio output channels | 9.2 channels |
| Signal-to-Noise Ratio (SNR) | 110 dB |
| Total Harmonic Distortion (THD) | 0.05 % |
| Dynamic power per channel (3 Ohm) | 400 W |
| Dynamic power per channel (4 Ohm) | 300 W |
| Dynamic power per channel (8 Ohm) | 180 W |
| Power output per channel (20-20KHz@8 Ohm) | 220 W |
| HDMI in | 8 |
| AC (power) in | Yes |
| Audio (L/R) in | 5 |
| Composite video in | 1 |
| USB ports quantity | 2 |
| S-Video inputs quantity | 4 |
| Multichannel audio input type | RCA |
| Component video (YPbPr/YCbCr) in | 3 |
| Connectivity technology | Wired |
| Speakers connectivity type | Banana connector |
| Audio formats supported | FLAC, LPCM, MP3, OGG, WAV, WMA |
| Wi-Fi | No |
| RDS features | PS, PTY, RT, TP |
| AM band range | 522 - 1611 kHz |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM |
| Preset stations quantity | 40 |
| Internet radio services supported | Last.fm, Napster, vTuner |
| Supported video modes | 1080p |
| Display | - |
| Product color | Silver |
| Audio decoders | Dolby Digital Plus, Dolby Pro Logic IIz, Dolby TrueHD, DTS-HD |
| Volume control | Rotary |
| Apple docking compatibility | iPhone, iPod |
| AC input voltage | 220-240 V |
| AC input frequency | 50 Hz |
| Power consumption (typical) | 1160 W |
| Certification | Windows 7 CE, EMC |
| THX-certified | THX Ultra2 Plus |
| Package weight | 31500 g |
| Depth | 463.5 mm |
|---|---|
| Width | 435 mm |
| Height | 198.5 mm |
| Weight | 25000 g |
Loading...