Onkyo TX-NR5008 Firmware Update

1
En
Firmware Update for TX-NR5008/TX-NR3008 and
PR-SC5508
There are the following methods to update the firmware: via network and via USB storage.
Please choose either one that suits your condition. Before you start, carefully read the
update procedure. It will take about 30 minutes to update the firmware.
■Update via network
You need a wired Internet connection to update the firmware.
For the update procedure, please refer to “Updating the Firmware via Network” (➔ 2).
■Update via USB storage
Please prepare a USB storage device such as a USB flash memory stick. You need at
least 32 MB of available space to update the firmware.
For the update procedure, please refer to “Updating the Firmware via USB” (➔ 5).
Precautions:
• Check the network connection before update.
• Do not touch the cable or any other device connected to the AV receiver/controller during updating
process.
• Do not access the AV receiver/controller from PC during updating process.
• Do not shutdown the power of the AV receiver/controller while update.
• The storage media in the USB card reader may not work.
• If the storage device has been partitioned, each section will be treated as an independent device.
• If the USB mass storage device contains a lot of data, the AV receiver/controller may take a while
to read it.
• Operation with all USB mass storage devices including the ability to power them is not guaranteed.
• Onkyo accepts no responsibility whatsoever for the loss or damage to data stored on a USB mass
storage device when that device is used with the AV receiver/controller. Onkyo recommends that
you back up your important music files beforehand.
• If you connect a USB hard disk drive to the USB port, Onkyo recommends that you use its AC
adapter to power it.
• USB hubs and USB devices with hub functions are not supported. Do not connect your USB mass
storage device via a USB hub.
• USB mass storage devices with security functions are not supported.
Limitation of liability
The program and accompanying online documentation are furnished to you for use at your own
risk. Onkyo will not be liable and you will have no remedy for damages for any claim of any kind
whatsoever concerning your use of the program or the accompanying online documentation,
regardless of legal theory, and whether arising in tort or contract. In no event will Onkyo be liable
to you or any third party for any special, indirect, incidental, or consequential damages of any kind,
including, but not limited to, compensation, reimbursement or damages on account of the loss of
present or prospective profits, loss of data, or for any other reason whatsoever.

Onkyo TX-NR5008 Specifications

General

Impedance	16 Ω
Output level	100 mV
Output impedance	470 Ω
Input sensitivity	200 mV
Audio output channels	9.2 channels
Signal-to-Noise Ratio (SNR)	110 dB
Total Harmonic Distortion (THD)	0.05 %
Dynamic power per channel (3 Ohm)	400 W
Dynamic power per channel (4 Ohm)	300 W
Dynamic power per channel (8 Ohm)	180 W
Power output per channel (20-20KHz@8 Ohm)	220 W
HDMI in	8
AC (power) in	Yes
Audio (L/R) in	5
Composite video in	1
USB ports quantity	2
S-Video inputs quantity	4
Multichannel audio input type	RCA
Component video (YPbPr/YCbCr) in	3
Connectivity technology	Wired
Speakers connectivity type	Banana connector
Audio formats supported	FLAC, LPCM, MP3, OGG, WAV, WMA
Wi-Fi	No
RDS features	PS, PTY, RT, TP
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Preset stations quantity	40
Internet radio services supported	Last.fm, Napster, vTuner
Supported video modes	1080p
Display	-
Product color	Silver
Audio decoders	Dolby Digital Plus, Dolby Pro Logic IIz, Dolby TrueHD, DTS-HD
Volume control	Rotary
Apple docking compatibility	iPhone, iPod
AC input voltage	220-240 V
AC input frequency	50 Hz
Power consumption (typical)	1160 W
Certification	Windows 7 CE, EMC
THX-certified	THX Ultra2 Plus
Package weight	31500 g

Weight and Dimensions

Depth	463.5 mm
Width	435 mm
Height	198.5 mm
Weight	25000 g