O P Q
(European, Australian
and Asian models)
(European, Australian
and Asian models)
Front Panel
1
z
ON/STANDBY button: Turns the unit on or into
standby mode.
2
BLUETOOTH indicator: Flashes while pairing with a
Bluetooth-enabled device is in progress and stays lit
when pairing is completed.
3
ZONE 2 button: Controls the ZONE function.
4
Wi-Fi indicator: Lights when the unit is connected to
the wireless LAN router.
5
Remote control sensor: Receives signals from the
remote controller.
6
OFF button: Switches the ZONE function to off.
7
Display
8
Listening mode buttons: Allows you to select the
listening mode.
9
DIMMER button (North American and Taiwanese
models): Switches the brightness of the display.
RT/PTY/TP button (European, Australian and Asian
models): Can be used when receiving the station
transmitting text information.
F
MEMORY button: Registers or deletes a station.
G
TUNING MODE button: Switches the tuning mode.
H
DISPLAY button: Switches the information on the
display.
I
HOME button: Displays the Home menu.
J
Cursor buttons,
l
TUNING
j
button,
d
PRESET
c
button and ENTER button: Moves the cursor and
confirms the selection. When listening to AM/FM
broadcasting, tune in to the station with
l
TUNING
j
or
select the registered station with
d
PRESET
c
.
K
RETURN button: Returns the display to the previous
state.
L
MASTER VOLUME: Allows you to adjust the volume.
M
MUSIC OPTIMIZER button
and indicator
(North
American and Taiwanese models): Turns on/off the
MUSIC OPTIMIZER function that improves the quality of
the compressed audio.
PURE AUDIO button and indicator (European,
Australian and Asian models): Switches to the PURE
AUDIO mode.
N
PHONES jack: Stereo headphones with a standard plug
are connected.
O
TONE and Tone Level buttons: Adjusts the high tone
and low tone.
P
Input selector buttons: Switches the input to be
played.
Q
AUX INPUT AUDIO/VIDEO jacks: A video camera or
such other device is connected.
R
USB port: A USB storage device is connected so that
music files stored in it can be played.
S
SETUP MIC jack: The supplied speaker setup
microphone is connected.
T
HYBRID STANDBY indicator: Lights if the unit enters
standby mode when the HDMI Through, network
standby or Wakeup from Bluetooth function is enabled.
To Next Page
Loading...
