To Next PageTo Next Page
Need help?Do you have a question about the Onkyo TX-NR414 and is the answer not in the manual?
General| Output impedance | 2200 Ω |
|---|---|
| Input sensitivity | 200 mV |
| Audio output channels | 5.1 channels |
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Total Harmonic Distortion (THD) | 0.08 % |
| Dynamic power per channel (3 Ohm) | 180 W |
| Dynamic power per channel (4 Ohm) | 160 W |
| Dynamic power per channel (8 Ohm) | 100 W |
| Power output per channel (1KHz@6 Ohm) | 130 W |
| Power output per channel (20-20KHz@8 Ohm) | - W |
| HDMI in | 6 |
| AC (power) in | Yes |
| Composite video in | 5 |
| USB ports quantity | 1 |
| Component video (YPbPr/YCbCr) in | 2 |
| Connectivity technology | Wired |
| Speakers connectivity type | RCA |
| Audio formats supported | AAC, FLAC, LPCM, MP3, OGG, WAV, WMA |
| Wi-Fi | No |
| RDS features | PS, PTY, RT, TP |
| AM band range | 530 - 1.710 kHz |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM |
| Preset stations quantity | 40 |
| Supported video modes | 1080i, 720p |
| Display | - |
| Product color | Black |
| Audio decoders | Dolby TrueHD, DTS-HD, DTS-HD Master Audio |
| Volume control | Rotary |
| Apple docking compatibility | Not supported |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Power consumption (typical) | 400 W |
| Package weight | 11500 g |
Weight and Dimensions| Depth | 328 mm |
|---|---|
| Width | 435 mm |
| Height | 173.5 mm |
| Weight | 9000 g |
Key safety guidelines to follow before operating the apparatus.
Information on the AV receiver's input and output connection types.
Identification and function of controls and indicators on the front panel.
Instructions for operating the AV receiver using its remote controller.
Step-by-step guide on how to connect speakers to the AV receiver's terminals.
How to select different listening modes for movies, music, and games.
Troubleshooting steps for when the AV receiver does not power on.
Troubleshooting for no audio output or very low volume.
Troubleshooting steps for when no video signal is displayed on the screen.
Troubleshooting steps for a non-functional remote controller.
