To Next PageTo Next Page
Need help?Do you have a question about the Onkyo TX-NR929 and is the answer not in the manual?
General| Receiver type | Surround |
|---|---|
| Frequency range | 20 - 20000 Hz |
| Output impedance | 470 Ω |
| Input sensitivity | 200 mV |
| Pre-out connectivity | Yes |
| Audio output channels | 9.2 channels |
| Signal-to-Noise Ratio (SNR) | 110 dB |
| Total Harmonic Distortion (THD) | 1 % |
| Dynamic power per channel (3 Ohm) | 300 W |
| Dynamic power per channel (4 Ohm) | 250 W |
| Dynamic power per channel (8 Ohm) | 150 W |
| Power output per channel (1KHz@6 Ohm) | 230 W |
| Power output per channel (20-20KHz@8 Ohm) | - W |
| HDMI in | 9 |
| Audio (L/R) in | 7 |
| Remote (IR) input | 1 |
| Composite video in | 5 |
| S-Video inputs quantity | 0 |
| Digital audio optical in | 3 |
| Component video (YPbPr/YCbCr) in | 2 |
| Headphone connectivity | 6.3 mm |
| Connectivity technology | Wired & Wireless |
| Speakers connectivity type | Banana connector/Binding posts |
| Multichannel pre out connectivity | RCA |
| AM band range | 530 – 1710 kHz |
| FM band range | 87.5 - 107.9 MHz |
| Supported radio bands | AM, FM |
| Preset stations quantity | 40 |
| Optical drive included | No |
| Display | LED |
| Product color | Silver |
| Audio decoders | Dolby Pro Logic IIz, Dolby TrueHD, DTS Neo:X, DTS-HD Master Audio |
| Apple docking compatibility | iPhone 3GS, iPhone 4, iPhone 4S, iPhone 5, iPod Touch 3, iPod Touch 4, iPod Touch 5 |
| Number of products included | 1 pc(s) |
| AC input voltage | 230-240 V |
| AC input frequency | 60 Hz |
| Power consumption (standby) | 0.15 W |
| Power consumption (typical) | 870 W |
| THX-certified | THX Select2 Plus |
| Package weight | 22000 g |
Weight and Dimensions| Depth | 198.5 mm |
|---|---|
| Width | 435 mm |
| Height | 437.5 mm |
| Weight | 18500 g |
Key safety guidelines to read and follow before operating the apparatus.
Detailed illustration and description of the AV receiver's front panel controls.
Instructions on how to use the remote to control the AV receiver and its tuner.
Guidance on connecting speakers and other components to the AV receiver.
Detailed instructions for connecting front, center, surround, and other speakers.
Step-by-step guide for wiring speakers and connecting powered subwoofers.
Guide for connecting various audio and video components, including TV and setup menu display.
Steps to properly connect the power cord to the AV receiver and the AC wall outlet.
Procedure to power on the AV receiver using the front panel or remote.
Procedure to power off the AV receiver and put it into standby mode.
Step-by-step guide for the automatic speaker setup process.
Steps for performing the automatic speaker setup, including microphone placement and test tones.
How to navigate and play music files from USB devices or network sources.
Step-by-step instructions for establishing a Bluetooth connection between devices.
Overview of the different listening modes available for movies, music, and games.
Access to common settings and the Setup Menu (HOME).
Instructions for updating the AV receiver's firmware via network.
Guide to using the remote controller to change AV receiver settings via Quick Setup or Setup Menu.
Provides quick access to frequently used settings for adjustment and information viewing.
Lists the main menu items and their corresponding sub-menu items for system configuration.
Specifying the distance from each speaker to the listening position for accurate sound arrival.
Enabling Audyssey settings for movie or music material after Room Correction.
Configuring HDMI CEC (RIHD) for component control and HDMI Through for video signal passthrough.
Enabling HDMI CEC for controlling connected components via HDMI.
Setup options for connecting Zone 2/3 speakers directly or via an additional amplifier.
Procedure to reset the AV receiver to factory defaults, clearing presets and custom settings.
Troubleshooting steps for issues related to powering the AV receiver on or off.
Troubleshooting steps for issues related to sound output, connections, and speaker settings.
Instructions for updating the AV receiver's firmware using an internet connection.
Instructions for updating the AV receiver's firmware using a USB storage device.
Technical specifications for the AV receiver's amplifier section, including power output and impedance.
