To Next PageTo Next Page
Need help?Do you have a question about the Onkyo TX-NR901 and is the answer not in the manual?
General| Channels | 7.1 |
|---|---|
| HDMI Inputs | 2 |
| HDMI Outputs | 1 |
| Network Capability | No |
| Component Video Inputs | 3 |
| Component Video Outputs | 1 |
| Digital Audio Inputs (Optical) | 3 |
| Digital Audio Inputs (Coaxial) | 2 |
| Input Sensitivity | 200 mV |
| Audio Formats Supported | Dolby Digital, Dolby Digital EX, Dolby Pro Logic II, DTS |
| THX Certified | Yes |
| Total Harmonic Distortion | 0.08% (at rated power) |
| Frequency Response | 10 Hz - 100 kHz |
| Video Inputs | Composite: 5, S-Video: 5 |
| Video Outputs | Composite: 2, S-Video: 2 |
| Audio Inputs | 7 |
Details about the amplifier section, including power and technology.
Features related to audio and video processing and inputs/outputs.
Specifications for the built-in FM and AM tuner.
Other features like OSD, remote control, and IntelliVolume.
Guide for adjusting the voltage selector on worldwide models for correct power input.
Instructions on how to install batteries in the remote controller.
Basic guidance on pointing and using the remote control sensor.
Identifies controls and indicators on the front panel of the receiver.
Identifies connectors and ports on the rear panel of the receiver.
How to use the remote controller in Amp mode for the TX-NR901.
How to use the remote controller for Net-Tune functions like Internet radio.
How to use the remote controller to operate a DVD player.
How to use the remote controller to operate a CD player.
How to use the remote controller to operate a MiniDisc recorder.
How to use the remote controller to operate a cassette recorder.
Details on how to configure speakers for surround sound experience.
Explains optimal placement for front, center, surround, and back speakers.
Instructions for attaching color-coded speaker labels for correct connection.
Guidance on using dipole speakers for surround sound effects.
Step-by-step guide on how to connect speaker cables to the terminals.
How to connect a powered subwoofer to the PRE OUT SUB output.
How to connect the supplied indoor FM and AM antennas.
Instructions for attaching and positioning the indoor FM antenna.
Instructions for assembling and connecting the indoor AM loop antenna.
Guide for connecting commercially available outdoor FM antennas.
Guide for connecting commercially available outdoor AM antennas.
Pre-connection checks and notes on optical digital inputs.
Overview of video and audio cable types and their corresponding sockets.
How to connect the receiver to a TV or projector using various video formats (Composite, S-Video, Component).
How to connect a DVD player for video and audio (Digital, Analog) playback.
How to use multichannel analog audio for DVD-Audio and Super Audio CDs.
How to connect a VCR for playing back video and audio.
How to connect a D-VHS VCR for video and audio playback.
How to connect a VCR for recording TV or other VCR sources.
Connecting various video sources like TV, satellite, and cable boxes.
Connecting camcorders, game consoles, and similar devices.
How to connect a CD player using optical, coaxial, or analog audio connections.
How to connect a cassette recorder for audio input/output.
Connecting digital audio recorders like DAT, CD, or MD.
How to connect a turntable, including phono input and grounding.
Connecting an external power amplifier to the TX-NR901.
Connecting other Onkyo components using the Remote Operation function.
How to connect power cords of other AV components to the receiver's AC outlets.
Connecting an external controller via the RS232 port.
How to connect the main power cord to the receiver and wall outlet.
Steps to turn on the receiver using the power switch or standby button.
How to turn on the receiver using the remote controller.
Explains the use of onscreen setup menus (OSD) for configuring the receiver.
How to specify the impedance of connected speakers for proper operation.
Explains how to specify connected speakers and their sizes for optimal sound.
How to set the crossover frequency based on speaker size and subwoofer presence.
How to specify distances from listener to speakers for sound synchronization.
How to adjust individual speaker levels using a test tone for balanced sound.
How to assign digital inputs to input sources and configure digital formats.
How to assign composite video/S-Video inputs to input sources.
How to assign component video inputs to input sources.
How to specify the location of an IR receiver for remote control.
How to change the remote control ID to avoid interference with other components.
How to change the remote controller's ID for proper operation with the receiver.
How to specify the AM frequency step for tuning in worldwide models.
How to specify the TV system for area-specific compatibility.
Changing input source display for compatibility with MiniDisc recorders.
How to select the AV component you want to listen to or watch.
How to temporarily mute the audio output of the receiver.
How to set the receiver to automatically turn off after a specified period.
How to adjust the brightness of the receiver's display.
How to connect and use headphones for private listening.
How to set the signal format for digital, analog, and multichannel inputs.
How to set digital inputs to accept only DTS, PCM, or both formats.
How to use the AM/FM tuner to find and preset radio stations.
How to select previously stored radio presets.
How to delete stored radio presets.
Explains the various surround sound decoders and DSP programs available.
Explains how to select different listening modes for audio playback.
Explains how to use Dolby Digital/EX and DTS/ES modes with surround back speakers.
Explains how to display information about the selected input source and listening modes.
How to adjust the volume of each speaker individually.
How to use the Re-EQ function to correct harsh high-frequency content.
How to use the Late Night function to reduce dynamic range for quiet listening.
How to use the multichannel analog input for DVD-Audio and Super Audio CDs.
How to assign an input source to the multichannel analog input.
How to select the multichannel analog input for playback.
How to adjust individual speaker volumes when using the multichannel input.
Explains how to record input sources and manage recording operations.
How to record the currently selected input source to a connected recorder.
How to record one source while listening to another.
How to record audio and video from separate sources for dubbing.
How to assign a specific listening mode to an input source for automatic selection.
Explains audio and listening mode settings for customizing sound.
Configuration options for volume display, muting, maximum volume, and headphones.
Settings for onscreen display customization: background, position, and immediacy.
How to name radio presets and input sources with custom text.
Specifying an input level for each source to balance volume differences.
Overview of using the TX-NR901 as a Net-Tune client for network audio playback.
Features for listening to Internet radio stations, including genre and location selection.
Information about Onkyo's Net-Tune Central server software and its protocol.
System requirements for running the Net-Tune Central server software on a computer.
Requirements for Ethernet network connection and router settings.
How to connect the TX-NR901 to an Ethernet network and router.
Step-by-step guide to selecting and playing Internet radio stations.
How to store up to 30 Internet radio stations as presets.
How to select previously stored Internet radio presets.
How to delete stored Internet radio presets.
How to select and play tracks from a Net-Tune server via album, artist, genre, or playlist.
How to select menu items by entering the first letter of their name.
How to play a random selection of tracks from a Net-Tune menu.
How to play tracks repeatedly from a Net-Tune menu.
How to select a Net-Tune server and configure track information display.
How to manually configure the TX-NR901's network settings, including DHCP and IP addresses.
Explains methods for connecting Zone 2: using a receiver, power amp, or speakers directly.
Using the 12V trigger output to control Zone 2 components.
How to control the TX-NR901 and Zone 2 components from another room.
Using a multiroom kit to extend remote control to Zone 2.
Using a multiroom kit to control the receiver when installed in a cabinet.
Using an IR emitter to control other components from Zone 2.
How to set the SURR BACK/ZONE 2 terminals for surround back or Zone 2 use.
How to turn on Zone 2, select input sources, and adjust volume for Zone 2.
How to enter remote control codes to operate other AV components.
Lists remote control codes for DVD players, VCRs, CBL receivers, and SAT receivers.
How to control a satellite receiver using the remote.
How to control a VCR using the remote.
How to control a TV using the remote.
How to control a cable receiver using the remote.
How to teach the remote controller new commands from other remotes.
How to program macros to perform sequences of actions with one button press.
Steps to create up to eight macros, each with up to eight actions.
How to run programmed macros.
How to name custom macros with up to five characters.
How to add new modes like DVD, TV, VCR, CBL to the remote controller.
How to change the order of modes displayed when scrolling.
How to delete unneeded remote controller modes.
How to assign a remote controller mode to a specific input source.
Setting the transmission format to infrared (IR) or radio frequency (RF).
How to reset the remote controller to its default settings.
Troubleshooting steps for power-related issues like not turning on or turning off unexpectedly.
Troubleshooting steps for audio issues like no sound, quiet sound, or noise.
Troubleshooting steps for video issues like no picture or incorrect OSD display.
Troubleshooting steps for tuner reception issues like noisy signals or missing stereo indicator.
Troubleshooting steps for remote controller issues like not working or not controlling other components.
Troubleshooting steps when the remote controller cannot operate other AV components.
Troubleshooting steps when command learning fails.
Troubleshooting steps for recording issues.
Troubleshooting steps when Zone 2 unexpectedly turns off.
Troubleshooting steps for Net-Tune and Internet radio connection problems.
Troubleshooting playback interruptions with Net-Tune tracks.
Explains common error messages and their solutions.
How to reset the receiver to its factory default settings.
Technical specifications for the amplifier section, including power and distortion.
Technical specifications for video inputs, outputs, and frequency response.
Technical specifications for the FM and AM tuner sections.
General specifications including power supply, dimensions, and weight.
Lists the types and number of video input connectors.
Lists the types and number of video output connectors.
Lists the types and number of audio input connectors.
Lists the types and number of audio output connectors.
Lists other connectivity ports like RS-232, Ethernet, and IR.
