Onkyo TX-NR929 Quick Start Guide

SN 29401500
(C) Copyright 2013 Onkyo Corporation Japan. All rights reserved.
* 2 9 4 0 1 5 0 0 *
Quick Start Guide
TX-NR929
Supplied Accessories
Make sure you have the following accessories:
a
Indoor FM antenna
b
AM loop antenna
c
Speaker cable labels
d
Remote controller and
two batteries (AA/R6)
e
Power cord
(Plug type varies from country to country.)
f
Speaker setup microphone
The AV receiver can automatically perform
speaker and surround settings, so that you
can easily enjoy a surround sound tailored
to your listening environment. Connect the
supplied microphone to the AV receiver and
follow the on-screen instructions.
When performing automatic speaker
setup, connect your TV to the AV receiver
and make the room as quiet as possible.
a
b
c
d
e
3
2
1
Speaker Cable
f
Using the Remote Controller
Batteries (AA/R6)
Approx. 16 ft. (5 m)
AV receiver
Remote control sensor
Note
Before connecting the power cord, connect all of your speakers and AV components.
1. Connecting Your Speakers
7 8
9 10
11 12
1 2
4 5
3
6
1
2
Front speakers
3
Center speaker
4
5
Surround speakers
6
Subwoofer(s)
7
8
Surround back speakers
9
10
Front high speakers
11
12
Front wide speakers
Speaker Configuration
5.1-channel:
1
2
3
4
5
6
7.1-channel:
1
2
3
4
5
6
+
7
8
7.1-channel:
1
2
3
4
5
6
+
9
10
7.1-channel:
1
2
3
4
5
6
+
11
12
9.1-channel:
1
2
3
4
5
6
+
7
8
+
9
10
9.1-channel:
1
2
3
4
5
6
+
7
8
+
11
12
9.1-channel:
1
2
3
4
5
6
+
9
10
+
11
12
11.1-channel
*1
:
1
2
3
4
5
6
+
7
8
+
9
10
+
11
12
*1
By using a combination of the built-in power amplifier for 9-channel
and an external power amplifier for 2-channel, you can enjoy up to
11.1-channel playback.
Please connect
1
,
2
,
3
,
4
,
5
and
6
for 5.1-channel surround.
Powered
subwoofer
6
Surround
speaker R
5
Surround
speaker L
4
2
Front
speaker R
3
Center speaker
1
Front
speaker L
Surround back
speaker R
8
Surround back
speaker L
7
Red Green White
BlueGray Tan Brown
Powered
subwoofer
6
11
Front wide
speaker L
9
Front high
speaker L
12
Front wide
speaker R
10
Front high
speaker R
WhiteWhiteRedRed
1/2''-5/8'' (12-15mm)
E n
- 2 -
Y1305-1

Onkyo TX-NR929 Specifications

General

Receiver type	Surround
Frequency range	20 - 20000 Hz
Output impedance	470 Ω
Input sensitivity	200 mV
Pre-out connectivity	Yes
Audio output channels	9.2 channels
Signal-to-Noise Ratio (SNR)	110 dB
Total Harmonic Distortion (THD)	1 %
Dynamic power per channel (3 Ohm)	300 W
Dynamic power per channel (4 Ohm)	250 W
Dynamic power per channel (8 Ohm)	150 W
Power output per channel (1KHz@6 Ohm)	230 W
Power output per channel (20-20KHz@8 Ohm)	- W
HDMI in	9
Audio (L/R) in	7
Remote (IR) input	1
Composite video in	5
S-Video inputs quantity	0
Digital audio optical in	3
Component video (YPbPr/YCbCr) in	2
Headphone connectivity	6.3 mm
Connectivity technology	Wired & Wireless
Speakers connectivity type	Banana connector/Binding posts
Multichannel pre out connectivity	RCA
AM band range	530 – 1710 kHz
FM band range	87.5 - 107.9 MHz
Supported radio bands	AM, FM
Preset stations quantity	40
Optical drive included	No
Display	LED
Product color	Silver
Audio decoders	Dolby Pro Logic IIz, Dolby TrueHD, DTS Neo:X, DTS-HD Master Audio
Apple docking compatibility	iPhone 3GS, iPhone 4, iPhone 4S, iPhone 5, iPod Touch 3, iPod Touch 4, iPod Touch 5
Number of products included	1 pc(s)
AC input voltage	230-240 V
AC input frequency	60 Hz
Power consumption (standby)	0.15 W
Power consumption (typical)	870 W
THX-certified	THX Select2 Plus
Package weight	22000 g

Weight and Dimensions

Depth	198.5 mm
Width	435 mm
Height	437.5 mm
Weight	18500 g