Need help?Do you have a question about the Onkyo TX-NR474 and is the answer not in the manual?
General| Receiver type | Surround |
|---|---|
| Frequency range | 10 - 100000 Hz |
| Output impedance | 470 Ω |
| Input sensitivity | 200 mV |
| Pre-out connectivity | Yes |
| Audio output channels | 5.1 channels |
| Signal-to-Noise Ratio (SNR) | 106 dB |
| Total Harmonic Distortion (THD) | 0.08 % |
| Dynamic power per channel (3 Ohm) | 160 W |
| Dynamic power per channel (8 Ohm) | 85 W |
| Power output per channel (1KHz@6 Ohm) | 135 W |
| Power output per channel (20-20KHz@8 Ohm) | - W |
| Display | - |
| Apple docking | No |
| Product color | Black |
| Audio decoders | DTS-HD Master Audio, DTS:X, Dolby Atmos, Dolby TrueHD |
| Damping factor | 49 |
| Satellite speaker crossover frequency | 200 Hz |
| AM band range | 522 - 1611 kHz |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM |
| Preset stations quantity | 40 |
| Internet radio services supported | Spotify |
| AC input voltage | 220-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.15 W |
| Power consumption (typical) | 400 W |
| Headphone connectivity | 6.3 mm |
| Number of HDMI outputs | 1 |
| HDMI in | 4 |
| Composite video in | 2 |
| Speakers connectivity type | Binding post |
| Bluetooth version | 4.1 |
| Bluetooth profiles | A2DP, AVRCP |
| Supported video modes | 480i, 480p, 576i, 576p, 720p, 1080i, 1080p |
| Package weight | 11000 g |
| Audio formats supported | AAC, AIFF, DSD, FLAC, MP3, WAV, WMA |
Weight and Dimensions| Depth | 328 mm |
|---|---|
| Width | 435 mm |
| Height | 160 mm |
| Weight | 8600 g |
To Next Page
