Need help?Do you have a question about the Onkyo TX-NR474 and is the answer not in the manual?
General| Receiver type | Surround |
|---|---|
| Frequency range | 10 - 100000 Hz |
| Output impedance | 470 Ω |
| Input sensitivity | 200 mV |
| Pre-out connectivity | Yes |
| Audio output channels | 5.1 channels |
| Signal-to-Noise Ratio (SNR) | 106 dB |
| Total Harmonic Distortion (THD) | 0.08 % |
| Dynamic power per channel (3 Ohm) | 160 W |
| Dynamic power per channel (8 Ohm) | 85 W |
| Power output per channel (1KHz@6 Ohm) | 135 W |
| Power output per channel (20-20KHz@8 Ohm) | - W |
| Display | - |
| Apple docking | No |
| Product color | Black |
| Audio decoders | DTS-HD Master Audio, DTS:X, Dolby Atmos, Dolby TrueHD |
| Damping factor | 49 |
| Satellite speaker crossover frequency | 200 Hz |
| AM band range | 522 - 1611 kHz |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM |
| Preset stations quantity | 40 |
| Internet radio services supported | Spotify |
| AC input voltage | 220-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.15 W |
| Power consumption (typical) | 400 W |
| Headphone connectivity | 6.3 mm |
| Number of HDMI outputs | 1 |
| HDMI in | 4 |
| Composite video in | 2 |
| Speakers connectivity type | Binding post |
| Bluetooth version | 4.1 |
| Bluetooth profiles | A2DP, AVRCP |
| Supported video modes | 480i, 480p, 576i, 576p, 720p, 1080i, 1080p |
| Package weight | 11000 g |
| Audio formats supported | AAC, AIFF, DSD, FLAC, MP3, WAV, WMA |
Weight and Dimensions| Depth | 328 mm |
|---|---|
| Width | 435 mm |
| Height | 160 mm |
| Weight | 8600 g |
Details the components and controls on the front of the AV receiver unit.
Identifies the various input and output jacks located on the rear of the AV receiver.
Explains the functions of the buttons and controls on the remote controller.
Guides through the steps of setting up speakers and connecting AV components.
Guides users through initial setup using an on-screen wizard for basic configuration.
Automatically calibrates speaker settings for optimal sound based on room acoustics.
Instructions for playing audio from connected AV components like Blu-ray players.
Details on wirelessly playing music from Bluetooth-enabled devices.
How to access and play internet radio stations via network connection.
Guide to using Spotify Connect for streaming music wirelessly.
Instructions for wirelessly streaming music from Apple devices using AirPlay.
How to play music files stored on a USB storage device.
Steps for tuning into and listening to AM and FM radio stations.
Instructions for streaming music files from network-connected PCs or NAS devices.
Guidance on choosing the optimal listening mode for different audio sources.
Explains the characteristics and effects of various listening modes available.
Configure input assignments for video and audio jacks.
Configure speaker channels, impedance, crossover, and distance settings.
Adjust audio settings like multiplex, mono, Dolby, and equalizer parameters.
Configure source-specific settings like IntelliVolume, Name Edit, and Audio Select.
Configure HDMI CEC, HDMI Standby Through, and Audio TV Out settings.
Configure Wi-Fi, Wi-Fi Setup, MAC Address, DHCP, and Proxy settings.
Configure Bluetooth functionality, Auto Reconnect, and Pairing Information.
Manage Auto Standby, HDMI Standby Through, and USB Power Out settings.
Configure tuner, remote ID, firmware update, initial setup, and lock settings.
Adjust bass and treble ranges of the front speakers.
Adjust speaker levels for center and subwoofer.
Enable or disable the equalizer function for room correction.
Addresses problems with unit power, unexpected shutdowns, and audio output.
Resolves issues like no sound, noise, sound reduction, and audio/video sync.
Troubleshoots video, CEC linked operation, tuner, Bluetooth, and network problems.
Explains HDMI features, compatible functions, and supported formats.
Lists the audio formats supported by the unit, including PCM and Bitstream.
To Next Page
