To Next PageTo Next Page
Need help?Do you have a question about the Onkyo TX-NR727 and is the answer not in the manual?
General| Impedance | 6 Ω |
|---|---|
| Receiver type | Surround |
| Frequency range | 20 - 20000 Hz |
| Input sensitivity | 200 mV |
| Audio output channels | 7.2 channels |
| Signal-to-Noise Ratio (SNR) | 106 dB |
| Total Harmonic Distortion (THD) | 0.08 % |
| Power output per channel (1KHz@6 Ohm) | 170 W |
| Power output per channel (20-20KHz@8 Ohm) | - W |
| HDMI in | 8 |
| Composite video in | 4 |
| Digital audio coaxial in | 2 |
| Digital audio optical in | 1 |
| Speakers connectivity type | - |
| Audio formats supported | FLAC, LPCM, MP3, WAV, WMA |
| Ethernet LAN | Yes |
| AM band range | 530 - 1710 kHz |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM |
| Preset stations quantity | 40 |
| Optical drive included | No |
| Product color | Silver |
| Audio decoders | Dolby Pro Logic IIz, Dolby TrueHD, DTS-HD Master Audio |
| Apple docking compatibility | Not supported |
| AC input voltage | 220-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.2 W |
| Power consumption (typical) | 690 W |
| Package weight | 14000 g |
Weight and Dimensions| Depth | 380 mm |
|---|---|
| Width | 435 mm |
| Height | 175 mm |
| Weight | 11200 g |
