Onkyo TX-RZ840

155
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Setting Item Default Value Setting Details
TV --- "HDMI 1 (HDCP 2.2)" to "HDMI 6 (HDCP 2.2)":
Assign a desired HDMI IN jack to the TV button. If
you do not assign a jack, select "---". To select an
HDMI IN jack already assigned to another input
selector, change its setting to "---" rst.
PHONO --- "HDMI 1 (HDCP 2.2)" to "HDMI 6 (HDCP 2.2)":
Assign a desired HDMI IN jack to the PHONO
button. If you do not assign a jack, select "---". To
select an HDMI IN jack already assigned to another
input selector, change its setting to "---" rst.
 3. Video Input
Change input assignment between the input selectors and COMPONENT VIDEO
IN jacks and the VIDEO IN jacks. If you do not assign a jack, select "---".
Setting Item Default Value Setting Details
BD/DVD COMPONENT "COMPONENT": Assign the COMPONENT VIDEO
IN jacks to the BD/DVD button.
"VIDEO 1", "VIDEO 2": Assign a desired VIDEO IN
jack to the BD/DVD button.
GAME --- "COMPONENT": Assign the COMPONENT VIDEO
IN jacks to the GAME button.
"VIDEO 1", "VIDEO 2": Assign a desired VIDEO IN
jack to the GAME button.
CBL/SAT VIDEO 1 "COMPONENT": Assign the COMPONENT VIDEO
IN jacks to the CBL/SAT button.
"VIDEO 1", "VIDEO 2": Assign a desired VIDEO IN
jack to the CBL/SAT button.
STRM BOX VIDEO 2 "COMPONENT": Assign the COMPONENT VIDEO
IN jacks to the STRM BOX button.
"VIDEO 1", "VIDEO 2": Assign a desired VIDEO IN
jack to the STRM BOX button.
PC --- "COMPONENT": Assign the COMPONENT VIDEO
IN jacks to the PC button.
"VIDEO 1", "VIDEO 2": Assign a desired VIDEO IN
jack to the PC button.
Setting Item Default Value Setting Details
CD --- "COMPONENT": Assign the COMPONENT VIDEO
IN jacks to the CD button.
"VIDEO 1", "VIDEO 2": Assign a desired VIDEO IN
jack to the CD button.
TV --- "COMPONENT": Assign the COMPONENT VIDEO
IN jacks to the TV button.
"VIDEO 1", "VIDEO 2": Assign a desired VIDEO IN
jack to the TV button.
PHONO --- "COMPONENT": Assign the COMPONENT VIDEO
IN jacks to the PHONO button.
"VIDEO 1", "VIDEO 2": Assign a desired VIDEO IN
jack to the PHONO button.