Need help?Do you have a question about the Onkyo TX-RZ840 and is the answer not in the manual?
General| Type | AV Receiver |
|---|---|
| Channels | 9.2 |
| Frequency Response | 5 Hz - 100 kHz |
| Total Harmonic Distortion | 0.08% |
| Input Sensitivity and Impedance | 200 mV / 47 kΩ |
| Signal-to-Noise Ratio | 106 dB |
| HDMI Inputs | 7 |
| HDMI Outputs | 2 |
| HDCP Support | 2.2 |
| Dolby Atmos | Yes |
| DTS:X | Yes |
| IMAX Enhanced | Yes |
| eARC | Yes |
| Multi-room Capability | Yes |
| Zone Output | Zone 2 and Zone 3 |
| Wireless Connectivity | Wi-Fi, Bluetooth |
| Wi-Fi | Yes |
| Bluetooth | Yes |
| Audio Formats Supported | Dolby Atmos, DTS:X |
| HDR Support | HDR10, Dolby Vision |
| Streaming Services | Spotify, Tidal |
| Video Inputs/Outputs | HDMI |
| Audio Inputs/Outputs | Analog, Digital |
| Digital Audio Inputs/Outputs | Coaxial, Optical |
Details on selecting speaker layouts and connection methods for various channel configurations.
Overview of the advanced settings available for configuring the unit's functions.
Settings for TV output, OSD, and assigning HDMI, video, digital, and analog audio inputs.
Configuration of speaker connections, including channel count, types, and impedance settings.
Step-by-step guide for initial setup upon first turning on the unit for basic configuration.
Basic steps to resolve issues when the unit behaves unexpectedly, like restarting or checking connections.
To Next Page
