Need help?Do you have a question about the Onkyo TX-RZ50 and is the answer not in the manual?
General| Impedance | 16 Ω |
|---|---|
| Receiver type | Surround |
| Frequency range | 5 - 100000 Hz |
| Input sensitivity | 200 mV |
| 4Ω speaker support | Yes |
| Audio output channels | 11.2 channels |
| Signal-to-Noise Ratio (SNR) | 106 dB |
| Total Harmonic Distortion (THD) | 0.08 % |
| Power output per channel (20-20KHz@8 Ohm) | 250 W |
| AM band range | 530 - 1710 kHz |
| FM band range | 87.5 - 107.9 MHz |
| Supported radio bands | AM, FM |
| Preset stations quantity | 40 |
| AC input voltage | 120 V |
| AC input frequency | 60 Hz |
| Power consumption (standby) | 0.1 W |
| Power consumption (typical) | 850 W |
| HDMI in | 6 |
| USB ports quantity | 1 |
| Digital audio optical in | 2 |
| Multichannel audio input type | RCA |
| Component video (YPbPr/YCbCr) in | 3 |
| Connectivity technology | Wired |
| Speakers connectivity type | Clamp terminals |
| Wi-Fi | No |
| AirPlay | - |
| Display | LCD |
| Product color | Black |
| Audio decoders | DTS:X, Dolby Atmos |
| THX-certified | THX |
| Cables included | AC |
Weight and Dimensions| Depth | 201.5 mm |
|---|---|
| Width | 435 mm |
| Height | 398 mm |
| Weight | 14000 g |
Accessing and using the receiver's setup menu and configuration options.
Step-by-step guide for initial system configuration using the auto start-up wizard.
Settings for connecting the unit to a network via wired or wireless LAN.
Controlling audio playback in separate rooms (Zone 2/3).
Steps to resolve common operational errors and issues.
Solutions for power loss and no sound issues.
Troubleshooting network and wireless playback problems.
To Next Page
