Onkyo TX-RZ50

153
SetupSetup
6. Multi Zone6. Multi Zone
 1. Zone 2
Change the settings for Zone 2.
 Output Level (Default Value: Fixed)
Select whether to adjust the volume on the integrated amplier in the separate
room or on this unit when outputting to Zone 2.
Fixed Adjust on the integrated amplier in the separate room
Variable Adjust on this unit
 Maximum Volume (Default Value: Off)
Set the maximum value for Zone 2 to avoid too high volume. Select a value
from "Off", "50" to "99". (When "3. Audio Adjust" - "Volume" - "Volume Display"
is set to "Absolute")
 Power On Volume (Default Value: Last)
Set the Zone 2 volume level of when this unit is turned on. Select a value
from "Last" (Volume level when the unit was turned off), "Min", "0.5" to "99.5"
and "Max". (When "3. Audio Adjust" - "Volume" - "Volume Display" is set to
"Absolute")
• You cannot set a higher value than that of "Maximum Volume".
 Sound Check (Default Value: -)
Output test tones to ZONE 2 to enjoy audio in a separate room (ZONE 2) in
addition to the main room.
Press ENTER while "Start" is being displayed. Operate by following the on-
screen displays.
 2. Zone 3
Change the settings for Zone 3.
 Output Level (Default Value:Fixed)
Select whether to adjust the volume on the integrated amplier in the separate
room or on this unit when outputting to Zone 3.
Fixed Adjust on the integrated amplier in the separate room
Variable Adjust on this unit
 Maximum Volume (Default Value: Off)
Set the maximum value for Zone 3 to avoid too high volume. Select a value
from "Off", "50" to "99". (When "3. Audio Adjust" - "Volume" - "Volume Display"
is set to "Absolute")
 Power On Volume (Default Value: Last)
Set the Zone 3 volume level of when this unit is turned on. Select a value
from "Last" (Volume level when the unit was turned off), "Min", "0.5" to "99.5"
and "Max". (When "3. Audio Adjust" - "Volume" - "Volume Display" is set to
"Absolute")
• You cannot set a higher value than that of "Maximum Volume".