22
Tip: You can go to Settings -> System -> Notifications & actions to set the
Notifications and Actions.
NOTE
• Select Expand or Collapse to expand or minimize the Quick Actions menu.
Power Management
When the apparatus is not connected power adaptor and not providing the main
function or when other energy-using products are not dependent on its function,
the default system settings and its characteristics enable the apparatus to
activate display sleep mode within 5 minutes of user inactivity, and to activate a
distinct sleep mode within 10 minutes of user inactivity. In the same scenario, when
the apparatus is connected to power adaptor, will activate display sleep mode
within 15 minutes of user inactivity, and activate a distinct sleep mode within 25
minutes of user inactivity. When in sleep mode, the system becomes fully usable
within 5 seconds via network connections or user interface devices. The power
management function is automatically switched on by the default system settings.
To Next Page
Loading...
