6
NOTES:
Before replacing a Micro SD Card, make sure the unit is powered off.
When inserting the Micro SD Card, make sure it is facing in the proper
direction.
Never force a card in violently, as it may damage the card or the unit. If
it doesn’t fit easily, check to ensure it is facing in the correctposition.
Please format the memory card prior to the first time it is used in
this device.
Important: Formatting the Micro SD Card will delete all the files on the card. Upload
the files to your computer before formatting the card
OPERATION
Car Dash Cam Mode:
1.
Recharge the built-in battery,as instructed earlier, and connect the power
supply to the car
’
s cigarette lighter socket for uninterrupted recording.
2.
Mount the unit to the desired location on the car
’
s windshield (or any
smooth surface) as instructed earlier.
3. When the unit is plugged in, it will automatically power on when you start your
car. At this time the Red and Blue Indicators will illuminate and the unit will enter
1080P Video recording mode.
4. When the unit is plugged out or you stall your car, the unit will automatically
power off.
Mini Action Cam Mode:
1. Recharge the built-in battery, as instructed earlier.
2. Press and hold the Button for 1 second, the Blue and Red Indicators will
illuminate, Then the Red Indicator will turn off. The unit will enter Standby Mode.
3. Short press the Button, the Blue Indicator will blink. The unit will start video
recording.
4. Short press the Button again to stop video recording. The Blue Indicator will
stop blinking.
5.
To power off, press and hold the Button for 6 seconds, the Blue Indicator will
blink three times then turn off.
Notes:
When the unit is without Micro SD Card, power on the unit, the Blue and Red Indicators
will blink Five times then turn off. The unit will power off.
December 31, 2019_V1
To Next Page
Loading...