11
RADIO, AUXILIARY INPUT, AND LINE INPUT
Using the Line Input
1 Tune the radio to the station you
want to save.
2 Press the MODE/CLK/PROG button
to enter the program mode,then
to select a preset number.
press the
PLAY/PAUSE/M+
button
3 Press the MODE/CLK/PROG button
again to save the current station.
Repeat steps 1/2/3 to program more
stations.
You can program up to 20 FM
presets and 10 AM presets.
Requires a RCA Cable (not included)
1 Connect an audio device to the
AUXILIARY INPUT.
2 Press the FUNCTION button to set
the unit to AUX mode as indicate
on the LCD Display.
The AUXILIARY INPUT will not work
when a device is connected to the LINE
INPUT.
3 The audio device will play through
the speakers.
play through
the speakers.
The audio device will
Requires a Line Input Cable (not
included)
2 Press the FUNCTION button to set
the unit to AUX mode as indicated
on the LCD Display.
When the LINE INPUT is connected,
the AUXILIARY INPUT will not work.
3
1 Press the STANDBY button until the
unit is turned on.
2 Press the FUNCTION button to set
the unit to Radio mode as indicate
on the LCD Display.
3 Press the STOP button to select
FM radio bands.
adjust the radio frequency.
Using the Auxiliary Input Using the Radio
4
4
P
5 Press and hold “play/pause/M+”to
enter into searching station
automatically.
ress the SKIP/TUNE buttons to
Saving with Program
1
Connect audio devices including
phones, tablets and mp3 players
to the
Note:
Note:
LINE INPUT.
To Previous Page
Loading...
Need help?
General
