Onn ONB18SB001 User Manual

BLUETOOTH OPERATION
10
5. After successful pairing, the Bluetooth indicator will stop blinking.
function are activated and they are in working range.
6. During playing:
~ Press the or button on remote control to skip tracks.
~ Press the button on remote control to pause, press it again to resume.
1. Power on the unit as previously explained.
3. Power on the external Bluetooth enable device and enter Bluetooth mode and try
searching the unit.
NOTE: The unit will be automatically connected with the last connected Bluetooth
device if their Bluetooth
13
7. Press and hold the button on remote control to disconnect current connection.
4. When
appears, select it and make connection.
2. Press the button on the unit or remote control repeatedly or press the button
on remote control to switch to
Bluetooth mode, the Bluetooth indicator on the unit
will turn Blue and blink.
"ONB18SB001"

Onn ONB18SB001 Specifications

General

Brand	Onn
Model	ONB18SB001
Category	Speaker System
Language	English