Onn ONA18SB002 User Manual

1
2
Package content
Identification of all buttons and jacks
Positioning
3
Connecting with a TV, Set-top box or Blu-ray / DVD Player
soundbar x 1
AC adapter x 1 remote control x 1
(with a CR2025 battery)
User manual x 1
Optical cable
OPTICAL
OUT
(not included)
Blu-ray/
DVD Player
Set-Top Box
TV
QUICK START GUIDE
Model: ONA18SB002
Quick Start Guide x 1
9
8
10 11 12
1 2 3 4 5
6 7
1 Standby/ON button
2 SOURCE button
3 AUX IN RED indicator
4 LINE IN GREEN indicator
5 / VOLUME button
6 BLUETOOTH BLUE indicator
7 DIGITAL IN AMBER indicator
When OPTICAL IN is selected
AMBER indicator will illuminate.
When COAXIAL IN is selected
AMBER indicator will be flashing.
8 AUX IN R / L jack
9 DC IN jack
10 COAXIAL IN jack
11 LINE IN 3.5mm jack
12 OPTICAL IN jack
Option 1 - Best
Place the soundbar on a flat stable surface. For optimal performance, the
soundbar should be centered underneath the TV or monitor. Be sure
there is nothing blocking the front of the soundbar, and the space
between the soundbar and the surface is not obstructed.
Up to three audio sources can have direct wired connections to the
soundbar. Identify the AUDIO OUT jacks (OPTICAL OUT/COAXIAL
OUT/AUX OUT) on the device you are attaching (e.g., TV, Blu-ray
player, or set top box). Choose the option below which best fits your
audio source. The corresponding button on the remote control or
soundbar allows you to switch between sources.

Onn ONA18SB002 Specifications

General

Brand	Onn
Model	ONA18SB002
Channels	2.0
Connectivity	Bluetooth, Aux-in
Bluetooth Version	5.0
Power Source	Rechargeable battery

Summary

Package Contents

Positioning the Soundbar

Button and Jack Identification

Connecting Audio Sources

Connecting via Optical Cable

Connect your TV, Blu-ray, or Set-top box using an optical cable for audio output.

Connecting via Coaxial Cable

Connect your TV, Blu-ray, or Set-top box using a coaxial cable for audio output.

Connecting via Audio Cable

Connect your TV, Blu-ray, or Set-top box using an audio cable for audio output.

Troubleshooting Common Issues

Unit Not Switching On

Ensure the unit is plugged in and the standby/on button is pressed.

No Sound Output

Check volume, source selection, TV audio settings, connections, and mute status.

Bluetooth Pairing Issues

Reset Bluetooth by toggling power or source selection on the soundbar.

Remote Control Not Working

Verify battery, installation, and check for obstructions to the remote sensor.

Connecting Other Devices

Bluetooth Pairing Procedure