onsenproducts.com
onsenproducts.ca
800-996-5559
support@onsenproducts.com
ENGLISH
USE AND OPERATION
Always check for gas leaks before using this water
heater. To do so, spray a mixed solution of water and
soap on the gas inlet connection. If bubbles start to form,
close the gas valve and seal the gas connection properly
before repeating the gas leak test.
Set the water regulator knob to maximum setting
(turn counter-clockwise ).
Set the gas regulator knob to minimum setting
(turn counter-clockwise ).
Ensure the showerhead button is in the OFF position .
1
2
3
DANGER
Gas regulator knob Water regulator knob