Chapter 2 Hardware Installation 2-6
Safety & Warranty
1. WARNING: To avoid risk of electric shock, this equipment
must only be connected to a supply mains with protective
earth.
2. WARNING: Do not modify this equipment without
authorization of the manufacturer.
3. Read these safety instructions carefully.
4. Keep this user's manual for later reference.
5. Disconnect this equipment from any AC outlet before cleaning.
Do not use liquid or spray detergents for cleaning. Use a
damp cloth.
6. For pluggable equipment, the power outlet must be installed
near the equipment and must be easily accessible.
7. Keep this equipment away from humidity.
8. Put this equipment on a reliable surface during installation.
Dropping it or letting it fall could cause damage.
9. The openings on the enclosure are for air convection. Protect
the equipment from overheating. DO NOT COVER THE
OPENINGS.
10. Make sure the voltage of the power source is correct
before connecting the equipment to the power outlet.
11. Position the power cord so that people cannot step on it. Do
not place anything over the power cord.
12. All cautions and warnings on the equipment should be noted.
13. If the equipment is not used for a long time, disconnect it from
To Next Page
Loading...
Need help?
General
