ooma HUB - Basic Calling Features

4
Disconnect the existing cable
Unplug the existing ethernet cable from your modem.
This is the cable that connects the ethernet port of the
modem to the port usually labeled “WAN” or “Internet”
on the router.
Reconnect to the ooma Hub
Plug the existing ethernet cable into the port labeled
HOME on the ooma Hub.
Connect to the modem
Use the ethernet cable provided and connect the port
labeled MODEM on the ooma Hub to the ethernet port
of the modem.
SKIP TO PAGE 6
Modem connected to a router
CONTINUED FROM PAGE 2
Modem
Router
May not be present
with Wi-Fi
Modem
Router
May not be present
with Wi-Fi
HOME
MODEM
Modem
Router
May not be present
with Wi-Fi
installing the ooma hub
B1
B2
B3
B