5
6
7
8
10
Connect the wires in the back of seat with the wires of the pad
9
Zipper
07 08
Move the armrest slowly to adjust the position and make the holes E and F
aligned, fasten the armrest with the Allen Driver and screw.
Repeat steps 6 and 7 to install other side armrest.
Attach the chair pad to the backrest with the zipper and Velcro tapes.
Firmly insert the air plug of main unit A into the air pipe of shoulder unit B. Insert
the side panels along the hook C to the holder D.
Repeat this step to install other side shoulder unit.
Firmly insert the air plug of main unit A into the air pipe of armrest B. Insert the
side panels along the hook C to the holder D.
Connect the wires on bottom of chair: Connect the jack cable from main unit (A)
with the female cable from backrest (B), firmly insert the air plug of main unit into
the air pipe of armrest.
To Next Page
Loading...
