OPCOM GrowWall - Page 10

Step 5.
Step 6.
Step 5. Place the wall bracket on top of R3,L3. Place the hollow plastic peg into the
round
hole in the bracket as shown. Put the screw into this tube, and with
a screw driver, affix the tube and the bracket to the unit.
Step 6.
R4,L4 gets inserted on top of the plastic pegs, as shown.
GrowWall
P7
User Manual
R4
L4
L1
L2
L3
R4
R3
R1
R2
L4
L1
L2
L3
R4
R3
R1
R2