Opel mobile FlipPhonePlus - Sound and Notifications

40
 Call Divert – Click ok using the left selection key to open the call divert settings
o By scrolling up or down using the up/down arrow keys then clicking ok using
the left selection key on a preferred setting. You can divert all voice calls, if
unreachable, if no answer, if busy, all data calls or cancel all diverts
 Call barring – Click ok using the left selection key to open the call barring menu.
o By scrolling up or down using the up/down arrow keys then clicking ok using
the left selection key you can call bar, Outgoing calls (All calls, International
voice calls, International voice calls except to home), incoming calls (All voice
calls, Voice calls when roaming) and cancel all.
 Advanced Settings – Click ok on advanced settings using the left selection key.
o Blacklist – Select ok using the left selection key to turn blacklist number on or
off. Then scroll down using the down arrow key, then ok using the left selection
key to add blacklist numbers
o Whitelist – Select ok using the left selection key to turn whitelist number on or
off. Then scroll down using the down arrow key, then ok using the left selection
key to add whitelist numbers
o Auto redial – Click ok on Auto redial using the left selection key to turn auto
redial on or off
o Answer mode – Click ok on answer mode using the left selection key. Then
scroll up or down using the up/down arrow keys, then click ok on the preferred
answer mode option using the left selection key.
Sound Frequency
1. Click on menu using the left selection key
2. Then scroll through until settings is highlighted using the up/down arrow key then click
ok using the left selection key
3. Click ok on Sound Frequency using the left selection key
4. Using the up/down arrow keys scroll through to select the preferred sound frequency
then click ok using the left selection key to save.
Low Battery Notice
1. Click on menu using the left selection key
2. Then scroll through until settings is highlighted using the up/down arrow key then click
ok using the left selection key