Opel mobile FlipPhonePlus - Page 41

41
3. Click ok on Low Battery notification using the left selection key
 Status – Click ok using the left selection key then scroll up or down using the up/down
arrow keys and click ok using the left selection key to turn this setting on or off
 Notified contacts – Click ok using the left selection key, then click edit on an empty
slot using the left selection key. You can then add a contact from your phonebook or
choose edit number to type in a phone number using the keypad
 Notification SMS – Click ok using the left selection key, then you can type your
preferred message using the keypad or keep the default message by clicking save
using the left selection key
User Profiles
1. Click on menu using the left selection key
2. Then scroll through until settings is highlighted using the up/down arrow key then click
ok using the left selection key
3. Click ok on user profiles using the left selection key
 Using the up/down arrow keys you can scroll through to select your preferred user
profile. Click options, then click activate using the left selection key to select you
preferred profile.
 To edit a user profile, highlight that profile then click options using the left selection
key, then scroll down to customise and click select using the left selection key and
the up/down arrow keys
Here you can adjust the following settings:
Alert type – Using the left and right arrow keys, you can change from vibrate and
ring, vibrate then ring, Ring only and Vibrate only.
Ring Type – Using the left and right arrow keys, you can change to repeat or
Beep once
Incoming call – Click options using the left selection key, then click select on
change using the left selection key. Using the up/down arrow keys you can scroll
through each ring tone. Once you have chosen your preferred ring tone click
select using the left selection key to save that ring tone.
Ringtone Volume – Using the left and right arrow keys, you can adjust the
ringtone volume up or down
Message tone – Click options using the left selection key, then click select on
change using the left selection key. Using the up/down arrow keys you can scroll
through each message tone. Once you have chosen your preferred message
tone click select using the left selection key to save that message tone.