44 Speech recognition
Operation via speech commands
Follow the instructions given by voice
output and shown on the display.
For best results:
● Listen for the voice prompt and
wait for the beep before saying a
command or replying.
● Read the example commands on
the display.
● The voice prompt can be
interrupted by pressing w again.
● Wait for the beep and then speak
the command naturally, not too
fast, not too slow.
Usually commands can be spoken in
a single command.
Voice pass-thru application
Activating speech recognition
Press and hold s on the steering
wheel until a speech recognition
session is started.
Adjusting the volume of voice
prompts
Turn m on the control panel or press
volume button on the steering wheel
upwards (increase volume) À or
downwards (decrease volume) Á.
Deactivating speech recognition
Press v on the steering wheel. The
speech recognition session is ended.
To Next Page
Loading...
