208 Vehicle care
4. Rotate bulb holder anti-clockwise
to disengage.
5. Remove bulb from holder and
renew bulb.
6. Insert bulb holder in bulb housing
and rotate clockwise.
7. Connect wiring plug to bulb
holder.
8. Insert and engage bulb housing.
Interior lights
Courtesy light, reading lights
Have bulbs replaced by a workshop.
Load compartment light
1. Prise the lamp out with a
screwdriver.
2. Press bulb slightly towards spring
clip and remove.
3. Insert new bulb.
4. Install lamp.
Instrument panel
illumination
Have bulbs replaced by a workshop.
To Next Page
