230 Vehicle care
4. Switch on electrical consumers
(e.g. headlights, heated rear
window) of the vehicle receiving
the jump start.
5. Reverse above sequence exactly
when removing leads.
Towing
Towing the vehicle
Disengage cap at bottom and remove
downwards.
Insignia OPC: Insert screwdriver in
the slot at the upper bend of the cap.
Release the cap by carefully moving
the screwdriver downwards. To
prevent damage it is recommended to
place a cloth between the screwdriver
and the frame.
The towing eye is stowed with the
vehicle tools 3 215.
To Next Page
Loading...
