Do you have a question about the Opel Touch R700 IntelliLink and is the answer not in the manual?
Touchscreen | Yes |
---|---|
Bluetooth | Yes |
USB Ports | Yes |
Navigation | Yes |
Smartphone Integration | Apple CarPlay, Android Auto |
Resolution | 800 x 480 pixels |
GPS Navigation | Yes |
SD Card Slot | Yes |
Radio | AM/FM |
Compatibility | Opel vehicles |
Voice Control | Yes |
Display Size | 7-inch |
Device must support BT protocol AVRCP 1.4 for browsing music.
Tap "NAV", then "DESTINATION", and choose destination type (address, POI).
Tap the red "X" button on the map screen or tap map to reveal it.
Tap the speaker icon on the map screen; can also set prompts to disable during calls.
Enable BT on phone, tap "PHONE" > "Pair Device" on infotainment, select phone, accept connection.
Ensure BT is enabled and visible; check phone compatibility via hyperlink.
Ensure phone supports PBAP protocol and has correct access permissions set.
Connect via BT, press and hold voice control button on steering wheel. Note: may require 3G/4G.
Connect to a secure Wi-Fi hotspot, then download and install apps via the SHOP feature.
Enable phone hotspot, connect infotainment to it via Wi-Fi settings.
CarPlay is a way to use iPhone apps optimized for in-car use on the infotainment display.
CarPlay uses voice commands, larger app layouts, and limited apps to minimize distraction.
For safety, some functions (e.g., contacts) are restricted while driving; use Siri or park the car.
iPhone 5 or later is required. Visit http://www.apple.com/ios/carplay/ for compatibility info.
Ensure Siri is enabled, connect iPhone via lightning cable, unlock iPhone, and allow access.
Tap app icons on the CarPlay home screen. Use the home button to return to home screen or start Siri.
Press steering wheel voice button or CarPlay home button. Siri requires 3G/4G for some functions.
Verify setup, ensure CarPlay is enabled in settings, use a factory USB cable, and check date/time.
Check iPhone's internet connection and Wi-Fi hotspot; some functions need 3G/4G.
Android Auto allows using Android smartphone apps optimized for in-car use via the infotainment display.
Android Auto uses voice commands, simpler layouts, and limited apps to keep eyes on the road.
Install Android Auto app, connect phone via USB, configure phone settings, and press the Android Auto icon.
Press steering wheel voice button or touch screen microphone icon. May require 3G/4G.
Verify setup, ensure Android Auto is enabled, use a factory USB cable, and check date/time.
Speak naturally, wait for beep tone, and refer to screen for valid commands.
Ensure correct country-dependent order (e.g., house number, street, city) and check screen for commands.
Store radio stations, media items, contacts, or destinations by pressing and holding favorites on the screen.