17
ATTACH EMERGENCY STOP PENDANT
Connect the included Emergency Stop Pendant (E-stop) to an auxiliary
port (AUX-1 or AUX-2) on the back of the robot.
Attaching and enabling the E-stop is
mandatory for attaching instruments
and running protocols on Flex.
For more information on using the
E-stop during robot operation, see the
System Description chapter in the Flex
Instruction Manual.
NAME YOUR ROBOT
Naming your robot lets you easily identify it in your lab environment.
If you have multiple Opentrons robots on your network, make sure to
give them unique names.
Congratulations! Now you’ve successfully set up your Opentrons
Flex robot!
Follow instructions on the touchscreen or in the Opentrons App to
attach and calibrate instruments.
To Next Page
Loading...