Opentrons Flex - Additional Product Information; Maintenance and Cleaning

OPENTRONS FLEX
Additional Setup Information
For more information about unboxing, assembly, software conguration,
moving/relocation, and attaching instruments and modules, see the
Installation and Relocation chapter in the Flex Instruction Manual.
Additional Product Information
MAINTENANCE AND CLEANING
You can use alcohol (70% solution), bleach (10% solution), or distilled
water to clean the robot. You can wipe off all the visible and easily
accessible surfaces of your Flex. This includes the exterior and interior
frame, touchscreen, windows, gantry, and deck. The Flex does not have
any internal parts that you need to open or disassemble for this level of
maintenance. If you can see it, you can clean it. If you can’t see it, don’t
clean it.
See the Maintenance and Service chapter in the Flex Instruction
Manual for more information.