The following operation can ONLY be performed by remote control or the
multifunction knob
DAC Mode
The FIGARO can be used as a high quality DAC.
This can be done through the AES and coaxial inputs used for receiving
external PCM sources.
This icon means the signal is unlocked.
Press multifunction knob or press OK on the remote control
This icon means the signal is locked and is in full operation.
To go back to the main screen - Press EXIT on the remote control or press the
multifunction knob for 2 seconds.
Volume control
Press V+/V- or rotate the multifunction knob.
To Next Page
Loading...