EasyManua.ls Logo

Opt Lasers TEC-8A-24V-PID-HC - Technical Data

Default Icon
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical Data
RS232 Programmable
Temperature
Controller ±100°C
(Advanced)
RS232 Programmable
Temperature
Controller
(Advanced)
Temperature
Controller (Basic)
Maximum current
8A
Input Voltage (V LOG)
5 – 24 V
Input Voltage (V TEC)
5 – 24 V
Serial Interface
3.3V Logic, 1 start bit = 0, 8 data bits, no parity, 1 stop bit = 1
Serial Transmission
Yes
Serial Reception
Yes
No
Temperature
Stabilization Accuracy
±2°C*
±2°C
±2°C
Temperature Tracing
Accuracy
±0.05°C
Cooling or heating
work
Yes
Temperature sensor
P0K1.202.3FW.B.007
10k NTC B=3950
Temperature range
Tmin and Tmax
-100 to +100°C
0 to +50°C
0 to +50°C
Heat sink required
No
Dimensions
45 x 60 mm
Mounting holes
37 x 52 mm
Mounting holes
diameter
3.2 mm
* Applicable for the range ±50°C. For the range ±100°C accuracy is ±3°C