Opt Lasers TEC-8A-24V-PID-HC

Need help?

Do you have a question about the Opt Lasers TEC-8A-24V-PID-HC and is the answer not in the manual?

Summary

Product Description

Technical Data

Pinout

Electrical Wiring

Advanced Program

Opened;Not connected SJ1 jumper mode

Describes operation when SJ1 jumper is open, including trimmer adjustments and behavior.

Closed;Connected SJ1 jumper mode

Details operation with SJ1 jumper closed, focusing on UART control and parameter setting.

Connectivity

Serial Protocol

Configuration Command

Explains the template and parameters for configuring the device via serial communication.

Single Byte Commands

Lists and describes simple single-character commands for device control.

PC Connection Guide

Communication via PuTTY

PuTTY Configuration

Guides on configuring PuTTY for serial communication with the device.

Serial Line Settings

Details setting serial line, speed, data bits, parity, and flow control in PuTTY.

Sending Commands via PuTTY

Explains how to send single byte and configuration commands using PuTTY.

Basic Program

Basic Program Functionality

Details the operation of the basic program, including trimmer adjustments and temperature range behavior.

Basic Program Behavior

Describes indicator behavior (WARNING LED, OC) and temperature drop responses in the basic mode.

Recommendations and Requirements

Protection