Need Help?
Call our experienced technical support
877-678-3343
asdfasdf
Need Help?
Call our experienced technical support
877-678-3343
12 | sTeP 3: ATM ProgrAMMiNg : hANTle/TrANAx/geNMegA ATMs
hANTle/TrANAx/geNMegA ATMs
TCP/IP Setup
Hantle (Tranax)/Genmega ATMs capable of TCP/IP communication
include: 1700W, C4000, 4000T, X4000, G1900, G2500, GT3000,
ONYX, ONYX-W, GT5000, C6000
Once the physical installation
is complete, the Status Light is
flashing green, and the Cell On
and Signal Lights are solid green,
enter the ATM’s Operator Menu
using your Master Password.
If your ATM menus appear differ-
ently than described in this Guide,
please call OptConnect technical
support at 877-678-3343 for fur-
ther assistance.
ENTER PASSWORD
THEN PRESS ENTER
• Customer Setup >
Change Processor >
Communication Scrolling List:
TCP/IP TYPE
Cardtronics Visa Framed TCP/IP
Columbus Data Standard TCP/IP
Data Stream (ASAI) Visa Framed TCP/IP
DNS (MoneyTree) Standard TCP/IP
EFX Standard TCP/IP
Elan/Genpass Visa Framed TCP/IP
1st ISO / First Data / Core Data Standard TCP/IP
ITS Systems Integrators Co Inc. Standard TCP/IP
Metavante Standard TCP/IP
NRT/ TNS Visa Framed TCP/IP
Planet Payment SSL Pass Through
Shazam Call 877-678-3343 opt 3
Switch Commerce Visa Framed TCP/IP
Worldpay / RBS Lynk Standard TCP/IP
Set ATM Communication Type: TCP/IP
To Next Page
Loading...