OptConnect OC-3501 - Page 18

Need Help?
Call our experienced technical support
877-678-3343
Need Help?
Call our experienced technical support
877-678-3343
18 | sTeP 3: ATM ProgrAMMiNg : TriToN ATMs (coNT)
Dene TCP/IP Parameters for ATM
• 2. Diagnostics >
7. Modem / Ethernet >
6.CongureEthernetSettings:
CONFIGURE ETHERNET SETTINGS
6. Enable DHCP Uncheck
1. IP Address 192.168.1.91
2. Subnet Mask 255.255.255.0
3. Default Gateway 192.168.1.90
- 4(x) Enter to Return to Main Menu -
• 5. System Parameters >
5. Restart the Terminal >
Enter
You are now ready to initialize your ATM. Once booted, perform
a balance inquiry. If this transaction fails, verify your setup in the
previous steps. If you are still unable to perform a successful bal-
ance inquiry, call OptConnect technical support at (877) 678-3343
for assistance.
TriToN ATMs
TCP/IP Setup