Optex SMDC-16 Programming Manual

Optex Inc. - 1845 W 205th St. - Torrance, Ca. 90501 - 800-966-7839 SMDC-16 Program Manual 3440-0252 A4
1. System Times1. System Times
1.4 Real Time Clock1.4 Real Time Clock
1.4.1. Time Clock
Both the time and date may be programmed in the installer program.
Note Note see 4.3.6- Clock / 4.3.6-AC Clock).
Important:Important: The Time/Date must be entered for all timing functions to operate correctly.
1.4.1.1 Set Date
DATE
00/00/00
Selections: 12:00am - 11:59pm
Default: No date
Enter the current date. (The SMDC is Y2K compliant).
1.4.1.2 Set Time
TIME HH:MM
__:__ AM 1=PM
Selections: 12:00am - 11:59pm
Default: No time
Enter the current time. If the time being entered is “PM,” press the “1” key after
entering the time.
1.4.2 Set by User
SET BY USER
NO 0=NO 1=YES
Selections: Yes / No
Default: Yes
Enable this option to allow for the user to set the date and time from the user program.
1.4.3 Display Time/Date for User
DISPLAY FOR USER
NO 0=NO 1=YES
Selections: Yes / No
Default: Yes
This option will enable the date and time to display on the top line of all keypads during
the disarmed period.
NoteNote: Enabling this option will override the messages programmed for the System Prompts
(see 4.4-System Messages).
1.4.4 Daylight Savings Adjust
DAYLIGHT TIME
NO 0=NO 1=YES
Selections: 0=No 1=Yes
Default: No
Enable this option to allow the internal clock to automatically compensate for daylight savings time.
1. System Times
1. Delay Times
1. Pre-Alarm
2. Entry Delay
3. Exit Delay
4. AC Fail Delay
5. AC Fail Display
2. Cutoff Times
1. Bell 1
2. Bell 2
3. Relay 1
4. Relay 2
5. PGM 1
6. PGM 2
7. PGM 3
8. Listen - In
3. Self Test
1. Daily
2. Weekly
3. Time of Day
4. Self Test Code
5. Abnormal test Code
6. Telco Test Report
7. Radio Test Report
4. Real Time Clock
1. Time Clock
1. Set Date
2. Set Time
2. Set by User

Optex SMDC-16 Specifications

General

Brand	Optex
Model	SMDC-16
Category	Cell Phone
Language	English