11
Mounting the Unit
Consider the following points before selecting where to install:
Do not mount the inverter on flammable construction materials.
Mount on a solid surface
Install this inverter at eye level in order to allow the LCD display to be read at all times.
For proper air circulation to dissipate heat, allow a clearance of approx. 10 cm to the side and approx. 50
cm above and below the unit.
The ambient temperature should be between 0°C and 55°C to ensure optimal operation.
The recommended installation position is to be adhered to the wall vertically.
Be sure keep other objects and surfaces as shown in the below diagram to guarantee sufficient heat
dissipation and to have enough space for removing wires.
Install the unit by screwing three screws.
To Next Page
Loading...