To Next PageTo Next Page
Need help?Do you have a question about the opticis HDFX-500-TR and is the answer not in the manual?
The Opticis HDFX-500-TR is a one-fiber detachable HDMI 2.0 extender designed to transmit high-resolution HDMI signals over a single optical fiber. This device facilitates the extension of HDMI 2.0 (4K UHD) signals up to 200 meters (656 feet) at 60Hz over one LC OM3 fiber, making it suitable for various professional audio/video installations where long-distance signal transmission is required without electrical hazard or interference. The HDFX-500-TR is engineered to be compact and lightweight, ensuring ease of installation and minimal visual impact in any setup.
The primary function of the HDFX-500-TR is to extend HDMI 2.0 signals, including video and audio, over a single optical fiber. It consists of a transmitter (HDFX-500-Tx) and a receiver (HDFX-500-Rx) module. The transmitter connects to an HDMI source, such as a computer or media player, while the receiver connects to an HDMI display, such as a monitor or projector. These modules are interconnected by a single LC optical fiber, which carries the HDMI signal.
The extender supports HDMI 2.0 standards, ensuring compatibility with the latest video and audio technologies. It can transmit 4K UHD (4096x2160) resolution at a 60Hz refresh rate, with full 4:4:4 chroma subsampling for RGB and YCbCr signals. This capability ensures that the extended signal maintains the highest possible visual quality, crucial for applications requiring pristine video. The total data rate supported is 18Gbps, which translates to 6Gbps per channel, allowing for smooth and uncompressed transmission of high-bandwidth content.
A key feature of the HDFX-500-TR is its support for High-Retention HDMI connectors. These connectors are designed to prevent accidental disconnection, providing a more secure and reliable connection in critical environments. This is particularly beneficial in installations where devices might be subject to movement or vibration.
The device also supports HDR (High Dynamic Range) at 10-bit or 12-bit color depths within its maximum bandwidth of 18Gbps. This ensures that content with enhanced contrast and a wider color gamut can be transmitted without degradation, delivering a more immersive viewing experience.
Furthermore, the HDFX-500-TR is compliant with various HDMI standards features, including CEC (Consumer Electronics Control), EDID (Extended Display Identification Data), and HDCP 2.2 (High-bandwidth Digital Content Protection). CEC allows for control of multiple HDMI-connected devices with a single remote, while EDID ensures that the display and source can communicate their capabilities for optimal signal configuration. HDCP 2.2 compliance is essential for transmitting protected content, such as Blu-ray movies or streaming services, ensuring interoperability with modern content protection schemes.
The extender can be powered either by USB power or a DDC 5V power from the HDMI source. The HDFX-500-TR is designed with auto power-switching, which makes it more reliable on its power supply. Opticis recommends using a USB power supply for stable power to both the transmitter and receiver modules, especially in setups where the DDC 5V from the HDMI interface might be insufficient or unstable.
The HDFX-500-TR is designed for straightforward installation and operation. The setup process involves connecting the transmitter to the HDMI source, the receiver to the HDMI display, and then linking them with a single LC optical fiber. The device includes LED indicators that provide visual feedback on its operational status. A Power LED indicates that the unit is receiving power, and a Status LED blinks to confirm signal connection and proper operation.
For optimal performance, it is crucial to follow the recommended installation sequence. First, power on the HDMI source and display. The transmitter can draw DDC 5V from the HDMI interface, but USB power is recommended for both modules for enhanced stability. Once connected to the HDMI source and display, the Power LED will illuminate, and the Status LED will blink three times, indicating initial signal detection. After connecting the optical fiber, ensuring the connectors are fully engaged, the Status LED will begin to blink regularly, signifying a complete and stable connection.
The HDFX-500-TR is designed to be fully interoperable with the HDFX-700-TR, offering flexibility in system design. This means that an HDFX-500-Tx can be paired with an HDFX-700-Rx, or vice versa, depending on the specific requirements of the installation.
The compact dimensions of the transmitter and receiver modules (22mm x 67mm x 14mm) allow for discreet placement behind displays or within equipment racks. Their small footprint minimizes clutter and simplifies cable management in complex AV setups.
The HDFX-500-TR is designed for minimal maintenance, requiring no special procedures for its optical system cables or power supplies. The device is built to be robust and reliable, ensuring long-term performance without the need for frequent intervention.
To ensure the longevity and proper functioning of the device, it is recommended to store and use the cables and power modules in a benign environment, free from liquid or dirt contamination. This helps prevent damage to the sensitive optical and electronic components.
The product contains no user-serviceable parts. In the event of any issues or malfunctions, users are advised to refer all service and repair inquiries to Opticis or its authorized distributor. This approach ensures that any necessary repairs or troubleshooting are handled by trained professionals, maintaining the integrity of the device and preserving its warranty.
For troubleshooting common issues such as a black screen or distorted display, the manual provides practical steps. These include checking all power and HDMI connections, ensuring the LEDs are illuminated, verifying that the HDMI source and display are powered on and properly booted, and resetting the system by re-plugging cables or rebooting the system. For display issues, it is recommended to check the graphic resolution settings to ensure they are within the supported limits of 4K UHD at 60Hz.
In summary, the Opticis HDFX-500-TR is a high-performance, user-friendly HDMI 2.0 extender that offers reliable long-distance transmission of high-resolution video and audio over a single optical fiber. Its robust design, adherence to HDMI standards, and minimal maintenance requirements make it an ideal solution for a wide range of professional AV applications.
General| Category | Extender |
|---|---|
| Model | HDFX-500-TR |
| Manufacturer | Opticis |
| Signal Type | HDMI |
| Wavelength | 850nm |
| Power Supply | 5V DC |
| Transmission Distance | 500m |
| Resolution Support | 4K |
| Fiber Type | Multimode |
| Product Type | Extender |
