Opticon OPT-6125 Series - Setting a Prefix or Suffix; Prefix Settings

Manual No. 25-ULGPMU01-01 Series OPT Handheld
CCD Scanner
Page 39
Setting a Prefix or Suffix
A Prefix and Suffix consisting of a maximum 4 direct input entries each may be included in front and at the end of
the string, respectively.
The following steps are used to establish a Prefix or Suffix that will be transmitted with the bar code data.
1) Scan Start/End Program Menu to enter programming mode.
2) Scan the bar code representing the desired symbology you wish to add a Prefix or Suffix to.
3) Scan the character(s) that comprise the Prefix or Suffix. Up to 4 numbers, letters or control characters may
be used.
4) Scan Start/End Program Menu to exit programming mode.
Prefix Settings
ZZ
Start/End
Program
Menu
-[[-
GL
Matrix 2of5
-HM-
I8
IATA
-J9-
L8
Telepen
-M9-
M0
UPC-A
+ add-on
/N1-
M1
UPC-E
+ add-on
-N2-
M2
EAN-13
+ add-on
-N!-
M3
EAN-8
+ add-on
-N!-
M4
Code 39
-N5-
M5
Codabar
-N6-
M6
Industrial 2of5
-N7-
CONTINUED ON NEXT PAGE...