Need help?Do you have a question about the Opticon OPT-6125 Series and is the answer not in the manual?
General| Supported Symbologies | GS1 |
|---|---|
| Connectivity | USB |
| Interface | USB |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Humidity | 5% to 95% (non-condensing) |
| Power Supply | USB |
| Dimensions | 165 mm x 80 mm |
| Light Source | LED |
Covers handshaking protocols and baud rate settings for RS232 communication.
Configuration options for data bits, stop bits, and parity in RS232 communication.
Introduces scanner programming via bar codes and outlines the step-by-step process.
Covers enabling and configuring various bar code symbologies for scanning.
Details how to add specific symbologies to the scanner's configuration for faster operation.
Options for configuring UPC-A and UPC-E bar codes, including check digit and country code.
Configuration options for EAN-13 and EAN-8 bar codes, including ISBN/ISSN translation.
Configuration options for Code 39 bar codes, including check digit and ASCII modes.
Options for configuring Codabar bar codes, including start/stop transmission and check digit.
Configuration options for 2of5 symbologies, including check digit and data length.
Configuration for MSI/Plessey symbology, including check digit calculations and transmission.
Configuration for Code 128 and EAN 128 symbologies, including FNC2 concatenation.
Configuration options for IATA bar codes, including check digit checks and transmission.
To Next Page
