2020
Video Output
Set the video mode as CVBS or RGB.
Antenna Power
The default setting is OFF. Set this option to ON if this receiver
box is connected to an external active antenna that amplifies the
received signal. This receiver box can supply 5V DC at 50mA
maximum.
Caution: If you are using a normal passive antenna,
make sure to set this setting to OFF .
Regional Setting
Region: Select the region or country you are located. Depending
on the country you select, the on-screen-display language and
time zone settings change accordingly.
OSD Language: Select the on-screen-display language as
required.
Time Zone: Select an appropriate time zone to display the local
time correctly. Both EPG and system schedule need a correct time
zone setting.
To Next Page
Loading...
Need help?
General
