7.4 IP Setting
First you must connect the Ethernet cable to the LAN port. Then in this menu,
you can set IP address manually, also you can get IP address automatically. If
the Ethernet cable is connected fine, it will display “Connected”.
8. Basic Operation
8.1 Audio
You can select the language you prefer in Audio if the current program is
available in multiple audio languages.
1. Press the AUDIO button.
2. Press the OK button to select the audio language you prefer.
3. Select audio direction (Left, Righ
t, Mix, Stereo) using the ◀
▏
▶button.
4. Press the EXIT button to close.
8.2 EPG
You can view the EPG information of all channels in time and date order.
1. Press the EPG button.
2. Press the GREEN button to switch EPG mode between Weekly EPG and
Day EPG.
8.3 Subtitle
You can select the language for the subtitle if the program provides subtitle
information.
1. Press the SUBTITLE button.
2. Select the required subtitle language and press the OK button. The subtitle of
the selected language will be displayed
at the bottom of the screen.
15
To Next Page
Loading...
