To Next PageTo Next PageWhat to do if my Opticum Receiver has no picture?
If your Opticum Receiver shows no picture, ensure the output cord is correctly connected. If the issue persists, the video output mode of the unit may differ from your monitor's mode; try resetting the working mode.
Why is my Opticum Receiver remote control not working?
If your Opticum Receiver's remote control isn't working, first, ensure the batteries are correctly installed. If it still fails, replace the batteries. Also, make sure you are within the effective operation range and that no bright light is interfering with the remote sensor; if so, try placing the unit elsewhere.
How to fix no sound on my Opticum X80 HDMI?
If you are not getting any sound from your Opticum Receiver, first check if the unit is muted and cancel the mute function. If that's not the problem, the volume might be set too low; increase the volume. Finally, ensure the cable is correctly connected.
What to do if my Opticum X80 HDMI cannot play scrambled channels?
If your Opticum Receiver is not playing scrambled channels, make sure the smart card is inserted correctly into the card reader slot, following the description on the right side of the receiver. If the card is inserted correctly, use the CARD button to access the Smart Card activation manager and follow the on-screen instructions to activate the smart card.
Why is there no color on my Opticum X80 HDMI?
If your Opticum Receiver shows no color, check that the output cord is correctly connected. If the problem persists, the video output system of the unit might be different from your monitor's mode; in that case, reset the working system.
How to fix Opticum Receiver when it cannot scan programs?
If you cannot scan programs on your Opticum Receiver, first ensure that the antenna is well adjusted. If the issue persists, double-check that you have correctly entered the Satellite, Frequency, SR, and Polarization parameters.
Why does my Opticum X80 HDMI Receiver have no power?
If your Opticum Receiver has no power, ensure the power cord is tightly plugged into the outlet and turn the power on. If there's still no power, turn off the power again and turn it back on after 5-10 minutes.
How to change audio language on Opticum Receiver?
To change the audio sound and subtitle language on your Opticum Receiver, press the Audio button to shift the channel to the correct sound channel.
Power| rated voltage | 230 V, 50 Hz |
|---|---|
| rated consumption | 6 W |
| standby consumption | < 1 W |
Operating Environment| operating temperature | 5-40℃ |
|---|---|
| operating humidity | <95% |
Input Specifications| input frequency range | 950-2150 MHz |
|---|---|
| RF input connector | IEC169-24, Female |
| input impedance | 75Ω |
Video and Audio| waveform | QPSK (SCPC, MCPC) |
|---|---|
| video decoding | MPEG2（MP@ ML） |
| video resolution | PAL 576, NTSC 480 |
Weight and Dimensions| net weight | 0.3 kg |
|---|---|
| receiver measurements | 180 mm × 90 mm × 42 mm |
Details the automatic power-off function for energy saving and user convenience.
Restores the receiver to its default channel list settings.
Guides through setting up satellite reception, including antenna and DiSEqC.
Scans for channels based on configured satellite list for custom channel tuning.
Manage TV and Radio channel lists, including deletion of all channels.
Configure satellite reception, antenna setup, and channel scanning.
Customize user interface functions like language, TV system, and time.
Manage software, access information, factory settings, and upgrades.
Access built-in games on the receiver.
Covers electrical safety, proper usage, cleaning, placement, and part replacement.
Information for private and business users on proper disposal of the product.
Manufacturer's declaration of product conformity with EU directives and standards.
Details product specifications including frequency range, resolution, and dimensions.
