10.
Steam Cleaning Carpets
NOTE: Before using the steam mop, vacuum the floor to remove any loose dirt or
debris.
IMPORTANT: Do not use the cleaner without a mop pad and carpet glider
attached to the mop head.
1. Place the cleaner onto the carpet glider.
2. Plug the cleaner into the power supply.
3. With your foot placed onto the floor head, pull
the handle backwards to unlock the cleaner.
The cleaner will emit steam in the unlocked
position.
5. With your foot placed onto the floor head push
the handle forward to lock the cleaner. The
cleaner will stop emitting steam in the locked
position.
4. Move the cleaner slowly backwards and
forwards paying particular attention to high
traffic areas.
stop steam
To Next Page
Loading...